Centrifuges generate enormous separation forces. Your floc has to survive them. SimpleFloc is designed to create strong aggregates that improve solids capture, centrate clarity, and cake dryness while reducing dependence on high polymer dose.
A centrifuge can separate solids quickly, but only if the incoming sludge is property conditioned. Fragile floc shears apart before it separates. Overdosing creates its own problems. The objective is strong, compact floc that survives acceleration and separates cleanly.
OPTIMIZE FOR
Shear resistance
Floc survives high-speed separation
Solids capture
More material stays with the cake
Centrate clarity
Fewer solids return downstream
Cake dryness
Less water in discharged solids
Polymer dose
Better conditioning with less chemistry
CarboNet works with leading operators in energy, municipal, food & beverage, mining, and industrial.
Municipal
A Water Pollution Control Facility aimed to increase sludge dryness and improve their ability to manage and transport cake solids.
Read-->
Food & beverage
Beyond savings in cost-to-treat, the changes also reduced Scope 3 emissions, creating successful outcomes for their EHS and maintenance teams.
Read-->
Municipal
A dredging operation in Texas was tasked with removing solids from a reservoir to clear blockage from a city water plant’s inlet. Over 40,000 cubic yards of sediment needed to be removed, dewatered, and sent to the landfill.
Read-->NanoNet allows CarboNet chemistry to create strong particle associations at low dose, an important advantage in high-shear equipment such as decanter centrfuges.
The result is a broader operating window between under-conditioning, where fines escape into the centrate, and over-conditioning, where polymer consumption rises without corresponding gains in performance.
Hear from people who use our chemistry.
“We cut suspended solids by 18% and polymer by 90%, then cut out make-down, which also saved our crew hours a week not messing with dosing.“
Randy Khalil, Dewatering & Water Treatment SME
“Within two hours of introducing CarboNet’s solution into the system, not only did the tanks start to clean up, with contaminants breaking loose from the walls, we were suddenly seeing stronger floc and our volumes went up to 85,000 barrels of water a day.“
Dave Williams, O&G Operator
“It’s the most technologically innovative water treatment application I have laid eyes on this decade. It has been excellent in helping us operate within spec, and in simplifying our overall process. It’s the difference between a system that just meets regulations and one that’s set up to accelerate and scale.”
Randy Khalil, Dewatering & Water Treatment SME
CarboNet chemistry improves dewatering efficiency with lower volumes of active polymer.
CarboNet product implementation specialists are on-site from jar tests through pilot and full scale implementation
Randy Khalil, Dewatering & Water Treatment SME
Let’s talk sludge, and savings
We’ll discuss your goals and help you see how our chemistry stacks up against your current solution. Expect a clear, detailed report on what we bring to the table.
© 2026 CarboNet. All rights reserved
